|
Action Automatic Door and Gate has an extensive range of seals and shelters designed to improve the efficiency of loading docks by either minimizing heat gain or heat Loss in the warehouse and transportation areas - depending on whether the environment needs to be kept warm or cold.
The control of energy consumption and conservation in the workplace is critical in minimizing costs. This can be achieved by not only preventing heat loss when storing goods in cold stores but also by avoiding fluctuations in temperature in workplace areas. This is where seals and shelters can help. The type of seal or shelter in Southwest Florida to be used will depend on the environment you are wanting to create. For example, a cold store would require either an Inflatable Dock Seal or an Inflatable Pad Seal, to provide a more efficient seal to minimize heat loss. Here are the 5 types of inflatable seals and shelter offered by Action Automatic Door and Gate: Serco SI450 Inflatable Dock Shelter · Standard Frame Projection: 24″ Side Frame / 34″ Head Frame · Standard Air Bag Fabric: 10 oz. Vinyl · Standard Side & Head Storage Curtain Fabric is 22 oz Vinyl & Includes Fiberglass Stays · Head Storage Curtain Includes Yellow Guide Stripes on 8′-6″ Centers · Side Curtains Are 16″ Wide; Head Curtain is 26″ High at Peak of Head Frame · Frames Are Pressure Treated Wood · Side Frames Are 2 x 4, Head Frame Has 2″ Rake with · 2 x 10 Front & 2 x 6 Back · Standard Head Bag Drop is 36″, 42″ or 48″ From Underside of Head Frame. · Standard Front Opening Width is 7′-6″ · Steel Supports Project 5″ Greater than Side Frame Projection · Includes Foam Filled Draft Pads in Bottom Corner · Blower Motor: 1/2 HP, 115V with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch) Serco SI400 Inflatable Dock Shelter · Standard Side Member Projection: 24″ · Side Member Face Width: 12″ · Side Member Backing: 2×8 Pressure Treated Wood · Standard Cover Fabric: 10 oz. Vinyl · Standard Head Member Projection is 10″ Greater than Side Member Projection · Front of Header Assembly is 2×8 · Top of Head Frame Has Upward Taper & Requires 2-1/2″ Clearance Above Unit Height · Blower Motor: 1/2 HP, 115v with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch) · Guide Stripes on Head Storage Curtain on 8′-6″ Centers · Head Member Mounting Flanges Require 2″ Clearance on Either Side · Head Member Consists Fiberglass Covered Treated Wood Frame Which Supports Integral Torsion Spring-head Bag Assembly (standard head bag drop is 36″ to 48″) Serco SI350 Inflatable Dock Seal · Standard Side Member Projection: 14″ · Side Member Face Width: 12″ · Side Member Backing: 2×8 Pressure Treated Wood · Standard Cover Fabric: 10 oz. Vinyl · Standard Head Member Projection is 10″ Greater than Side Member Projection · Front of Header Assembly is 2×8 · Top of Head Frame Has Upward Taper & Requires 2-1/2″ Clearance Above Unit Height (i.e. 11′-8″ high unit requires 11′-10-1/2″ clear at wall). · Blower Motor: 1/2 HP, 115v with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch) · Guide Stripes on Head Storage Curtain on 8′-6″ Centers · Head Member Mounting Flanges Require 2″ Clearance on Either Side · Head Member Consists Fiberglass Covered Treated Wood Frame Which Supports Integral Torsion Spring-head Bag Assembly (standard head bag drop is 36″ to 48″) Serco SI310 Inflatable Rail Shelter · Standard Projection: Up to 48″ · Standard Cover Fabric: 10 oz. Vinyl · Side & Head Member Backing: 2 x 12 Pressure Treated Wood · Blower Motor: 1/2 HP, 115V with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch) · Metal Blower Cover & Retraction Brackets Included. · Standard Top, Bottom & Side Member Face Width: 12″ · Standard Air Tube Location 36” in on Top Left · Rail Shelter Projection is Equal to Distance From the Inside of Near Rail to Building Wall Minus 24″ (field survey) or Centerline of Track to Building Wall Minus 54″ (architectural plans) · Only One of These Projection Calculations is Required · Approximately 28″ Clearance Required Above Top of Unit for Mounting of Motor Blower & Retraction Bracket System · 4-Sided Unit Should Be Sized So Bottom Is 24″ Below-dock Level (notify factory if hydraulic rail ramp is present) Serco SI300 Inflatable Dock Seal · Standard Projection: 12″ · Standard Cover Fabric: 10 oz. Vinyl · Side & Head Member Backing: 2×8 Pressure Treated Wood · Standard Head & Side Member Face Width: 12″ · Blower Motor: 1/2 HP, 115v with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch) · Metal Blower Cover Included · 24″ High Guide Stripes at Bottom of Side Members · Front Opening Width is Approx. 7’-6″ We offer a free survey and quotation service from one of our dedicated sales team to ensure that you choose the most suitable product for your application. Visit https://www.actiondoor.com/ for more details and services or contact us at 800-375-3667 (Southwest Florida), 941-627-0150 (Charlotte County), 239-643-3667 (Collier County), 239-768-3667 (Lee County).
0 Comments
Most loading dock companies are always facing the daily challenges for the safety of their workforce personnel and facility assets. Facility managers are always trying to find ways to protect and safely secure their loading docks.
Action Automatic Door and Gate company, one of the pioneers in the business of garage doors, openers, gates, access systems and commercial doors in Southwest Florida, offers its seven protective systems ideally for loading docks: · SERCO SAFETY GATE A must requirement for any loading dock helps secure and protect products, work personnel and machinery from unwanted accidents or hazardous incidents. Technical Specifications: Height: 30” Barrier Designed suitably for protection against Wide Door Openings: 8’, 9’ and 10’. Highly durable against 15,000 lbs. Load at 4 MPH Available in Models DGB-M (Manual) /DGB-P (Powered) DGB-P (Powered) Model Only - Controller :PLC Programmable - Control Panel (Interlock Capable): Steel NEMA 12 Push-button - Barrier Arm: Electrical reversing Edge - LED Interior & Exterior Light Communication System Model DGB-M (Manual) -Operational side- Left or Right Side -Dock Leveler-Independent -Yellow Painted Safety For brochures please click on at /https://s3.amazonaws.com/duraservproducts/protective-systems/dgbm-serco-dock-guard-safety-gate/scb701-06sercosafety-gatebrochure.pdf. · IMPACT-A-TRACK Shields overhead door tracks from bumps and force impact especially during the busiest loading works. Thru its protection, saves also the maintenance expenses for the damages of facility utilities. Technical Specifications: Availability : 3’,6’ or full door heights. Durability: Heavy-Duty ·APS SENTRY RAIL Every loading docks protector and a necessity. Easily installed post mounted direct rails make loading workload works smoothly with secured peace of mind. Technical Specifications: Highly durable against 10,000 lb. load at 4 mph Availability: Double Rail (42″)/Single Rail (18″)/ Customized Post With Removable/Swing Gate (Optional) Can be easily relocated or installed at ease For other technical details, please click at https://s3.amazonaws.com/duraservproducts/protective-systems/aps-sentry-rail/aps-resource-sentry-rail-spec-10-10.pdf. · APS TRAK SENTRY Another door tracks protective system for low-profile designs. Securely installed around door’s track area, guarding against lift trucks caused-damages. Technical Specifications: Availability: 4’ (Standard Height) Built: Heavy-duty Steel Includes: grade nuts and bolts, safety yellow color, powder coated and epoxy-based for durability. For floor installation: 6 heavy-duty anchors/ wall anchors by others For other technical details, please click at https://s3.amazonaws.com/duraservproducts/protective-systems/aps-trak-sentry/aps-resource-trak-sentry-hd-spec-10-10.pdf. · APS Z-TRACK GUARD Preserves your overhead door tracks against wear and tear. Built with high durability standards and powder coated safety yellow color makes it an ideal additional protective system accessory. Technical Specifications: Availability: 30″ high-estimated weight (pair): 42 lbs. and 48″ high-Est. weight (pair): 80 lbs. Compact system for more floor space Avoid interference with security wiring around the door opening For other technical details, please click at https://s3.amazonaws.com/duraservproducts/protective-systems/aps-z-track-guard/aps-resource-z-guard-spec-03-11.pdf. ·FORK SENTRY/ TRUCK BARRIER Lift trucks and forks are one of the most dangerous and accident-prone machinery in loading docks. Fends off hazards and accidents by protecting your workplace personnel and machinery using Fork Sentry/ Truck Barrier. Technical Specifications: Heavy duty/8″ high construction/gusseted Availability: 18″ and 60″ length standard sizes /other sizes (available upon request) With high visibility safety yellow For other technical details, please click at https://s3.amazonaws.com/duraservproducts/protective-systems/heavy-duty-fork-sentry/products-332+fork-sentry-spec-sheet-10-10.pdf. · STANDARD RACK SENTRY PROTECTION The total protector for your rack system, easily attachable to your rack uprights and prevents from rough beating up of forklifts impacts. Technical Specifications: Availability: Various widths 3”/76mm; 3.25”/80mm.;3.5”/90mm.;4”/100mm. and 4.75”/100mm. Each piece: 18”/457 mm. (Tall) / Enabled-stackable Rack Sentry Cutouts: 3”/75mm. uprights; Can be placed over beams -5”/127mm. or 7”/178mm. from the floor (Cutaway section on the Return Arms) For other technical details, please click at https://s3.amazonaws.com/duraservproducts/protective-systems/standard-rack-sentry-protection/2008racksentry4pages.pdf You can make a request for a FREE ESTIMATE with Action Automatic Door and Gate now at https://www.actiondoor.com/request-quote/, either for an upgrade with you loading dock’s protective systems or simply add-ons, your protective tools will be safer and protected loading dock working facility. For protective system inquiries, you can contact our service offices at 800-375-3667 (Protective Systems -Southwest Florida), 941-627-0150 (Charlotte County), 239-643-3667 (Collier County), 239-768-3667 (Lee County). For other details and information, you can click at our website at https://www.actiondoor.com/ Most loading dock companies are always facing the daily challenges for the safety of their workforce personnel and facility assets. Facility managers are always trying to find ways to protect and safely secure their loading docks.
Action Automatic Door and Gate company, one of the pioneers in the business of garage doors, openers, gates, access systems and commercial doors in Southwest Florida, offers its seven protective systems ideally for loading docks: · SERCO SAFETY GATE A must requirement for any loading dock helps secure and protect products, work personnel and machinery from unwanted accidents or hazardous incidents. Technical Specifications: Height: 30” Barrier Designed suitably for protection against Wide Door Openings: 8’, 9’ and 10’. Highly durable against 15,000 lbs. Load at 4 MPH Available in Models DGB-M (Manual) /DGB-P (Powered) DGB-P (Powered) Model Only - Controller :PLC Programmable - Control Panel (Interlock Capable): Steel NEMA 12 Push-button - Barrier Arm: Electrical reversing Edge - LED Interior & Exterior Light Communication System Model DGB-M (Manual) -Operational side- Left or Right Side -Dock Leveler-Independent -Yellow Painted Safety For brochures please click on @ https://s3.amazonaws.com/duraservproducts/protective-systems/dgbm-serco-dock-guard-safety-gate/scb701-06sercosafety-gatebrochure.pdf. · IMPACT-A-TRACK Shields overhead door tracks from bumps and force impact especially during the busiest loading works. Thru its protection, saves also the maintenance expenses for the damages of facility utilities. Technical Specifications: Availability : 3’,6’ or full door heights. Durability: Heavy-Duty · APS SENTRY RAIL Every loading docks protector and a necessity. Easily installed post mounted direct rails make loading workload works smoothly with secured peace of mind. Technical Specifications: Highly durable against 10,000 lb. load at 4 mph Availability: Double Rail (42″)/Single Rail (18″)/ Customized Post With Removable/Swing Gate (Optional) Can be easily relocated or installed at ease For other technical details, please click @ https://s3.amazonaws.com/duraservproducts/protective-systems/aps-sentry-rail/aps-resource-sentry-rail-spec-10-10.pdf. · APS TRAK SENTRY Another door tracks protective system for low-profile designs. Securely installed around door’s track area, guarding against lift trucks caused-damages. Technical Specifications: Availability: 4’ (Standard Height) Built: Heavy-duty Steel Includes: grade nuts and bolts, safety yellow color, powder coated and epoxy-based for durability. For floor installation: 6 heavy-duty anchors/ wall anchors by others For other technical details, please click @ https://s3.amazonaws.com/duraservproducts/protective-systems/aps-trak-sentry/aps-resource-trak-sentry-hd-spec-10-10.pdf. · APS Z-TRACK GUARD Preserves your overhead door tracks against wear and tear. Built with high durability standards and powder coated safety yellow color makes it an ideal additional protective system accessory. Technical Specifications: Availability: 30″ high-estimated weight (pair): 42 lbs. and 48″ high-Est. weight (pair): 80 lbs. Compact system for more floor space Avoid interference with security wiring around the door opening For other technical details, please click @ https://s3.amazonaws.com/duraservproducts/protective-systems/aps-z-track-guard/aps-resource-z-guard-spec-03-11.pdf. · FORK SENTRY/ TRUCK BARRIER Lift trucks and forks are one of the most dangerous and accident-prone machinery in loading docks. Fends off hazards and accidents by protecting your workplace personnel and machinery using Fork Sentry/ Truck Barrier. Technical Specifications: Heavy duty/8″ high construction/gusseted Availability: 18″ and 60″ length standard sizes /other sizes (available upon request) With high visibility safety yellow For other technical details, please click @ https://s3.amazonaws.com/duraservproducts/protective-systems/heavy-duty-fork-sentry/products-332+fork-sentry-spec-sheet-10-10.pdf. · STANDARD RACK SENTRY PROTECTION The total protector for your rack system, easily attachable to your rack uprights and prevents from rough beating up of forklifts impacts. Technical Specifications: Availability: Various widths 3”/76mm; 3.25”/80mm.;3.5”/90mm.;4”/100mm. and 4.75”/100mm. Each piece: 18”/457 mm. (Tall) / Enabled-stackable Rack Sentry Cutouts: 3”/75mm. uprights; Can be placed over beams -5”/127mm. or 7”/178mm. from the floor (Cutaway section on the Return Arms) For other technical details, please click @ https://s3.amazonaws.com/duraservproducts/protective-systems/standard-rack-sentry-protection/2008racksentry4pages.pdf You can make a request for a FREE ESTIMATE with Action Automatic Door and Gate now @https://www.actiondoor.com/request-quote/, either for an upgrade with you loading dock’s protective systems or simply add-ons, your protective tools will be more safe and protected loading dock working facility. For protective system inquiries, you can contact our service offices @800-375-3667 (Protective Systems -Southwest Florida), 941-627-0150 (Charlotte County), 239-643-3667 (Collier County), 239-768-3667 (Lee County). For other details and information, you can click at our website @ https://www.actiondoor.com/ |
Archives
March 2020
Categories |